Search

See all of our over 30 Brands

Waterite Vectamaxx RSLHP7200 gpd Reverse Osmosis System Free Ship

FREE SHIPPING

Waterite Vectamaxx RSLHP7200 gpd High Pressure Reverse Osmosis System

GENERAL SPECIFICATIONS TYPE: Extra Low pressure RO, spiral wound membrane(s) in series, recirculation loop

VOLTAGE: 230VAC/60hz (other voltages available on request)

SERVICE AMPS: 230VAC RSLHP7200 10.3 VAC

FEED WATER PRESSURE: 30 psi minimum, 70 psi maximum

FEED WATER TEMP: 40º C maximum  

MATERIAL SPECIFICATIONS: FRAME COLOUR: White powder coat

FRAME MATERIAL: Mild steel square tubular, c/w leveling feet

FRAME DIMENSIONS: Height 50" (127cm) Width 31" (79cm) Depth 24.0" (62cm) OPERATING PRESSURE: 230 psi (9.1 bar) for RSLHP7200

MEMBRANE: BLACK MAX®, spiral wound TFC, BME- 4040S, 2400 USGPD permeate @ 2000 mg/l NaCl, 100 psi, 25ºC feed

UNIT DRY WEIGHT: RSLHP7200: 163 lbs. (74 kg)

INLET SOLENOID: 220VAC/60hz, normally closed, ¾” FNPT, 0 differential, brass LOW PRESSURE SWITCH: 220VAC/60Hz cut-out @ 15 psi DRIVE PUMP MOTOR: 230VAC/60hz, type 56J frame, 3450 RPM, threaded shaft, ball bearing

DRIVE PUMP: Multi-stage 416SS, stainless discharge, housing and bracket, Noryl impellers and stages, SS bearings, wear rings, couplings and pump shaft. RSLHP7200: 10 USGPM @ 200 psi (Based on 0 psi inlet pressure)

CONCENTRATE VALVE: Brass needle valve, internally bypassed, metal seated, o-ring packing

RECIRCULATION VALVE: Brass needle valve, metal seated, o-ring packing

SYSTEM FITTINGS: Schedule 40 PVC LOW PRESSURE FITTINGS: Jaco standard pressure compression or DMT push-on LOW PRESSURE TUBING: Higher pressure 1/2” LDPE, clear PRE-FILTRATION HOUSING: 1 X Polypropylene, 20”, 125 psi rated, o-ring seated with threaded cap, pressure release, 1” inlet/outlet, full flow, 20 USGPM maximum

FILTER CARTRIDGE: Polypropylene, 5-micron SPEC RO-SYS-002R5 SMEMBRANE HOUSING: 304 SS body, polyethylene caps, band clamp closure, ¾” FNPT concentrate ports, ½” permeate port, 300 psi rating (optional)

PRESSURE GAUGES: Glycerin filled, stainless body, 2 1/2’’. 0-100 psi pre-filter pressure pre/post, 0-200 psi system pressure

FLOW METERS: Acrylic panel mounted, 0.5-5.0 USGPM or 1.0 - 10.0 USGPM, dependent on model

HIGH PRESSURE RELIEF VALVE: Watts model 3L, bronze body, set at 150 psi for 2400-7200

PERFORMANCE SPECIFICATIONS PERMEATE PRODUCTION RATE: RSLHP7200 2.8 USGPM (10.6 LPM)

Calculated production rate @ feed water of >2000 ppm 25ºC, average system pressure @ 230psi, 50 % recovery, inlet pressure of 50 psi.

WASTE PRODUCTION RATE: Recovery Rate @ 50% Feed Water >2000 TDS RSLHP7200 6.3 USGPM (15.9 LPM)

MEMBRANE CROSSFLOW: RSLHP7200: (1) 8 USGPM (30 LPM) RECOMMENDED FEED WATER PRETREATMENT SPECIFICATIONS: TDS: < 4000 TDS HARDNESS: < 6 gpg (103 mg/l) TOTAL IRON: < .05 ppm TANNIN: < .5 ppm CHLORINE: < .1 ppm pH: 5.5 – 9.5

ORGANIC/MICROBIOLOGICAL ACTIVITY: 0 MANGANESE: < .05 PPM

FEED WATER REQUIREMENTS: RSLHP7200: 10.5 USGPM minimum


R/O RSLHP7200

Please note:  These systems are built to order so allow 6-8 weeks for delivery.  Also since these are built to order, all sales are final.

All products include FREE standard shipping in Canada!

File Downloads

Click the button to open the PDF file in your browser. Then you can save the file to your device.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Shipping Policy

We offer FREE Shipping anywhere in Canada. Once your order is placed, we process it the next business day and ship via ground transportation. In very remote locations, whenever the shipping costs become prohibitive we reserve the right to either cancel the order or ask that you contribute to the shipping costs, it's up to you. Your items may take anywhere from a few days up to a few weeks to arrive.

If you have any special shipping requirements, like requiring a signature at time of delivery, please leave a message in the "Special instructions for seller" section while checking out. If you order multiple products they may not all arrive at the same time as we ship from multiple warehouses and each item will be shipped directly to you. If no one is home when your order is delivered it will be left for you but we cannot assume responsibility for your order once it has been dropped off.

If you have any questions please contact us at info@TheWaterEstore.com

Thank you for your order, we appreciate your business!

Returns

Excluded Items

We do not offer refunds or returns on items built to order including Aclarus Ozone systems, Reverse Osmosis systems larger than 500 gpd or water softeners/iron filters over 1 cubic foot. 

Returns

Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately, we can’t offer you a refund or exchange.

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

To complete your return, we require a receipt or proof of purchase.

Please do not send your purchase back to the manufacturer.

Refunds

Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.

If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.

Late or missing refunds

  • If you haven’t received a refund yet, first check your bank account again.
  • Then contact your credit card company, it may take some time before your refund is officially posted.
  • Next contact your bank. There is often some processing time before a refund is posted.
  • If you’ve done all of this and you still have not received your refund yet, please contact us at info@WaterEstore.com.

Sale items

Only regular priced items may be refunded, unfortunately, sale items cannot be refunded.

Exchanges

We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at info@WaterEstore.com and send your item to: The Water Store 1004 King Street Midland Ontario CA L4R0B8.

Shipping

To return your product, you should mail your product to:

The Water Store
1004 King Street
Midland Ontario CA L4R0B8

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

Still Got Questions?

Not to worry, we're here to help. Let us know what questions you have about Waterite Vectamaxx RSLHP7200 gpd Reverse Osmosis System Free Ship and one of our experts will get back to you shortly.